top of page

Pressing Instructions

Hey! Thanks for purchasing from us!

 

Pressing Instructions for the DTF transfers are below,

but if you have any questions please contact us!

DTF Transfers

  • 320 degrees;

  • Heavy pressure 8 - 9 PSI

  • Pre-press for 7 seconds to remove wrinkles + moisture

  • Press for 15 - 20 seconds; LET COOL THEN PEEL

  • Press again for 8 seconds with a parchment paper covering the design for protection

* Please Note - the time and temperature are only suggestions, each heat press is different and you may need to adjust based on your own press and it's best settings.

WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

bottom of page